DAS3-2RADIO - DAS3-3RADIO - EXP-EAS-E - EXP-GPIO-E - EXP-2NICGIG - USB/4R232
NONOISE-PS - R165A - R194 - 627 - XBOB - RF-PRO-1B - J55FM - J56-162
Double Tri-band 2-Radio receiver module - DAS3-2RADIO
DASDEC Double Tri-band 2-Radio receiver module. This FACTORY INSTALLED option upgrades any DASDEC without internal radios. Dual receivers allow any combination of AM, FM, or WX (NOAA) frequencies, tunable and level controlled via the browser interface. model: DAS3-2RADIO
3 Radio receiver module - DAS3-3RADIO
DASDEC 3 Radio receiver module. Upgrade any DASDEC without internal radios. Three receivers allow any combination of AM, FM, or NOAA frequencies, tunable and level controlled via the browser interface. model: DAS3-3RADIO
Expanded EAS Decoder Audio Inputs - EXP-EAS-E
Expanded EAS Decoder Audio Inputs. Internal hardware and software option adds two extra decoder analog-mono audio input channels for external receivers (not included). Expands EAS monitoring inputs to six (6) total. Uses internal expansion port, therefore cannot be combined with MPE2-4 or EXP-GPIO options. model: EXP-EAS-E
Expanded GPIO Inputs and Outputs - EXP-GPIO-E
Expanded GPIO Inputs and Outputs. Internal hardware and software option to add 8 more GPIO Inputs and 8 more GPIO Outputs, for a total of 10 Inputs and 10 Outputs onboard. Uses internal expansion port, therefore cannot be combined with MPE2-4 or EXP-EAS options. model: EXP-GPIO-E
EXP-2NICGIG
Dual Port Gigabit Ethernet Expansion option ONLY available for DAS3-EX or DASDEC-II /4 & /5 series. This FACTORY INSTALLED option adds two (2) 10/100/1000BASE-T Ethernet ports for a total of three (3) independent network interfaces. Please contact the factory regarding upgrading in-field units.
USB to 4 Serial Port Expander - USB/4RS232
USB to 4 Serial Port Expander – Provides four (4) additional RS-232 serial ports for independent control of multiple serial devices. Used for a variety of applications such as multiple CG's, LED signs, or logo inserters for centralcasting and MultiStation installations. model: USB/4RS232
No Noise (fan-less) Power Supply Option - NONOISE-PS
No Noise (fan-less) Power Supply Option. This FACTORY INSTALLED option provides a highquality adapter and external fan-less power supply replacing the standard internal switching mode power supply and associated fan. Please contact the factory regarding upgrading in-field units. model: NONOISE-PS
Stereo A/V and IF/RF Relay Panel - R165A
The Model R-165A Audio/Video Relay Panel provides four, independent 2 x 1 (A/B) balanced stereo audio follow video relay switches. The switches are controlled by Digital Alert Systems program timers, remote controls or CATV Cue Tone® receivers via contact closures or logic inputs. Each video relay will also function as a high quality IF/RF 2 X 1 (A/B) switch, with frequency response to 950 MHz. Auxiliary relays 1 & 2 available for GPI or SAP switching.
8 Channel EAS Crawl Generator - R194
R194 is an eight channel on-screen composite video text character generator that can overlay characters onto program video during EAS alerts. Alert audio also replaces program audio for each channel. Video loop-thru connections are all BNC type. Audio loop-thru connections are all pluggable screw terminals. Control is by standard RS-232 signaling using DB9 type connectors. Up to 32 R194’s can be daisy-chained together to allow EAS service to as many as 255 individual analog channels from a single DAS EAS controller.
A/V Switch - 627A
The Model 627A Stereo Audio/Video Switch module provides 2x1 (AB) balanced stereo audio follow video switching. The 2x1 switch will respond to a contact closure or a transistor switch to ground or a compatible logic level. The control input is buffered to eliminate high output current drive requirements of the controlling device. The 627A can be controlled by Digital Alert Systems program timers, remote controls or CATV Cue Tone receivers.
Single channel analog NTSC video EAS text crawl overlay system XBOB
The XBOB is a low cost single channel analog NTSC video EAS text crawl overlay system. Places the EAS message as crawling text over NTSC program video, or black background if no video is present. Uses one DASDEC serial port and works with any of the DASDEC TV packages (DASLPTV, DASLPTVR, DASTV, or DASTVR). model: XBOB
RF-PRO-1B
External Amplified AM Broadcast receiving radio antenna. Wide-band amplification with directional control and gain coupling on 75Ω impedance "F" type connectors. Loop is 38" in diameter and includes 12 VDC power inserter and mounting hardware fitting up to 2" poles
J55FM
External FM Radio Antenna. Horizontally polarized 5-element Yagi is specifically designed for the FM radio (88-108MHz) frequency range. Offers 6-7dB of gain with 75Ω impedance on "F" type connectors. Fits 1½" to 2" poles.
J56-162
External NOAA Weather Radio Antenna. Vertically polarized 5-element Yagi was designed explicitly for the 162MHz NOAA (WX) operating frequency. Offers 7dB of gain with 75Ω impedance on "F" type connectors. Fits 1½" to 2" poles.